Your location:
Wattage (W) | 20W/30W/50W/80W/100W |
Material | Die-casting aluminum+PC lens |
Color | Grey |
Voltage (V) | AC85-265V |
Hz | 50/60Hz |
CRI | ＞80 |
Lumen efficiency (LM/W) | 90LM/W±10% |
Color temperature (K) | 2700K-6500K |
IP | IP65 |
Energy class | F |
Installation | Standard street light interface |
Warranty | 2 years/3 years |
Approval | CE/RoHS/New ERP |
Optional advantagesl | Intellectual Control | Zigbee | Lora |
1. The core of LED light is the chip. Clients should be careful to prevent some bad manufacturers from using counterfeit chips and low-end chips.
2.Many LED street light manufacturers have cut corners and falsely marked product parameters.
3.When the PN junction temperature of LED chips increases by 10 degrees, the lifetime of semiconductor devices decreases by multiple. Therefore, if the heat dissipation design is poor and the configuration is unreasonable, it will quickly lead to LED aging and reduce the stability. In addition, unreasonable configuration often leads to the specific use situation can not reach the expected value.
4.Many LED manufacturers use copper alloy, gold clad silver alloy wire and silver alloy wire instead of expensive gold wire. After long time using this kind of wire the light will die easily.
Normally we offer 3 years warranty,but we also offer 2years warranty with different technique solution.
As it is small watts series from 20W to 100W,for example 100W,the maxim height is 6M.
IES Angle Diagram
Garden LED Street Light (Racket)
